Unscrew the magazine cap. This also holds the barrel on.

 

 

Pull the barrel straight away from the receiver.

 

 

The metal object is the magazine spring retainer. With some work (or not) it will pull out. There is also the plug, spring, and follower.

 

 

This is the spanner wrench that you should have for your chokes.

 

 

Use the spanner wrench to unscrew forearm cap. Once removed, the forearm will slide off the tube.

 

 

To remove the trigger assembly, use a punch to remove this pin. Then pull the trigger assembly out of the receiver.

 

 

Next we remove the ejector. Use your thumb to depress the rod enough to lift it off the pin and then slide it out the front.

 

 

The slide arm bridge screw must be removed before removing the bolt assembly from the receiver

 

 

Pull the slide arms off the tube, but take care to not allow the bolt assembly to fall freely.

 

 

Hold it together so the slide arm bridge (circled) does not fall off. The firing pin and firing spring are under pressure and the slide arm bridge holds them together.

 

 

Keep pressure on the firing pin while lifting off the slide arm bridge.

 

Everything should be taken part enough for a proper cleaning. The trigger assembly may be covered in the future.

 

Home